Jan 102013

If you’ve ever used a PC running a mature version of Windows – that is, one that has been installed and used for quite some time, and that has had numerous freeware and paid-for applications installed on it – you’ll know that the overall speed and responsiveness is generally much slower than a freshly installed copy of Windows. The same thing is also true of the boot speed. A mature Windows installation can take noticeably longer to reach the desktop than a brand new installation.

That said, even a freshly installed copy of Windows isn’t quite as fast as it could be when it comes to the boot process. Windows doesn’t come pre-optimized, especially when it comes to the processes carried out during the boot cycle. There are many things Windows does during the boot procedure that probably doesn’t even apply to your PC, such as checking for network connections. On a single-user, standalone PC these operations and checks are still carried out, since they are part of the generic Windows boot process – whether you like and need them or not. There are a few things you need to know in order to speed Up Windows boot-up.

Stop Autostarting Programs

A large number of Windows applications, from freeware and shareware utilities to full-blown commercial suites such as Microsoft Office, manage to insert some portion of them into your Windows setup. Each one of these programs loads and runs every time you start Windows. Apart from the obvious memory implications, the time added to your boot-up process can be horrendous by the time you get ten or 15 of these residents. A common misconception is that they all run from the StartUp folder – they don’t, and most will be triggered using specialized Registry entries.
It can be difficult to decide what you can and can’t remove from the list of autorun programs, although TweakAll does make it easier by showing the full name, so you can work out which entry belongs to which application. To begin with, a common offender is the Microsoft Office Startup application, which is rarely used yet still manages to load every time you boot. Other programs such as Adobe’s Photoshop insert ancillary extras such as the Adobe Gamma Loader, which you can happily disable. In some cases, you’ll find entries for little-used utilities that come attached to major programs, and in other cases pieces of hardware – the SoundBlaster Live cards can install stuff like this that you’re unlikely to need and can happily switch off until you do, for example.
There are some you should never turn off, though. For all Windows systems, leave entries such as ScanRegistry and SystemTray well alone, as these are critical parts of Windows itself and are best left alone. For Windows Me systems, you’ll need to leave StateMgr alone, too, as this is part of the PC Health system that integrates with essential utilities such as System Restore.

Analyse Your Bootlog

You can make boot logs to check for problems that may be slowing you down.

1. Force Windows to create a boot log and launch Boot Log Analyzer. Click the Show delays button to display only items that have taken a long time. You’ll need to sift through this manually and check to see what’s causing the delays, since it could be anything from corrupted fonts to missing programs.

2. Enable the Show failures button. Usually, you should see nothing more than a failure reference to SDVXD, and this is normal. The most common failure refers to NDIS2SUP.VXD, a network driver.
3. Find the file (usually it’s in the Windows/System folder) and move it somewhere safe, deleting the original. Load Regedit and use the Find function to remove each reference to this file. Boot again and check your boot log – this failure should now be gone.

Speed Up Your Boot Time

Need to reduce your boot time? Follow these steps to shave a second or two here and there off that seemingly endless wait.

1. Switch to TweakUI’s Boot tab. For greatest effect, make sure Always show boot menu is switched off, and disable the Display splash screen while booting box.

2. Next, edit the Msdos.sys. This is hidden, so you need to show it via the View tab in Folder Options. Call up the file’s Properties, and switch off the Hidden and Read-only attributes.

3. Open the file in Notepad. Switch off the Windows logo by adding the line, Logo=0. You can also increase speed by disabling the log Windows creates during boot time by adding the line, DisableLog=1.

4. Open TweakAll’s Run Programs plugin. Here you can disable autoloading programs. Unlike other solutions, TweakAll displays all methods used to start programs, and not just the StartUp folder.

5. As you can see, most autoloading programs are controlled using Registry keys rather than by running from the StartUp folder. You’ll find most offenders in Registry Run – Local Machine.

6. Expand the trees by double-clicking down through the levels. For more detailed advice on what you can and can’t remove, read the main text. To kill an entry, select it and click the Remove button.

Still, if your Windows has boot-up problems, I bet there is no way the above methods could help you out. Luckily that we’ve got a lot program that could easily solve all boot-up problems such as blue or black screen that appears when we boot up computer. Windows Boot Genius is such a professional tool which is there to help.